Panduit FLCSMCXAQY The OptiCam® LC Fiber Optic Connector is a multimode 50/125μm OM3/OM4/OM5 simplex fiber connector, intended for 900-micron tight-buffered fiber installation. Field termination can be done in about two minutes using the OptiCam 2 Termination Tool. The pre-polished fiber end face eliminates time-consuming field polishing, reducing installation costs. The LC connector has a natural-colored body with an aqua-colored backbone and a 900μm boot.

The optical gel acts as a medium for which the light can pass between the two ends of the fiber. The optical gel has a refractive index very close to that of the fiber core making a nearly seamless connection that results in a minimal loss. One of the quickest and most reliable ways is to utilize an index matching fluid or index matching optical gel deployed between cleaved ends of two optical fibers. The optical gel acts as a matching medium between the two cleaved or polished ends of the fiber minimizing the reflections and therefore minimizing the loss. Without the gel (or with a gel that did not closely match the IOR of the fiber being mated), the reflections would be severe (low return loss) and could cause significant loss of light (high insertion loss).

see our other product too at the official Tokopedia


Panduit FLCSMCXAQY Specifications

Note For use with the OptiCam 2 Termination Tool
Polish Type Pre-Polished
Fiber Type OM3/OM4/OM5
Connection Type LC
Sub Brand OptiCam®
Application Maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect.
Body Style Simplex
Color Aqua
Boot Color Aqua
Backbone Color Aqua
Fiber Diameter (µm) 900
Maximum Operating Temperature (°C) 60
Maximum Operating Temperature (°F) 140
Minimum Operating Temperature (°C) 0
Minimum Operating Temperature (°F) 32
Standards Met RoHS Compliant; TIA/EIA-604 FOCIS-10 compliant; exceeds TIA/EIA-568-D.3 requirements
Product Type Fiber Optic Connectors, LC OptiCam

Packaging Detail

UPC 07498304748
Std. Pkg. Qty. 1
Std. Pkg. Volume (cf) 0.0037
Std. Ctn. Qty. 10
Std. Ctn. Volume (cf) 0.0369

Panduit giving you the best way to reduce your cost and make a precision type for your result. with this optic connector, you have no worries. This gel is deployed at the end of the fiber stub in the connector (in the factory) and because of its thixotropic nature and the design of the OptiCam® Connector, it will not migrate while sitting on the shelf (unterminated) or while
deployed in the field. As Panduit Distributor we give you the best product for your networking system. FPS-ENP serve you best


There are no reviews yet.

Be the first to review “FLCSMCXAQY”

Your email address will not be published.